My Saved Designs
Sign In To My Account
Email Sign Up
Single Family Builders
Where To Buy
Closets and storage areas usually have common situations or conditions that a designer should consider when designing a storage solution. Those considerations are listed here.
It’s essential to know if there are any special needs or handicaps to be accommodated, e.g. user’s height, extent of reach, ability to bend.
allows today’s storage spaces to be adjusted to handle tomorrow’s needs. Components can be added at any time.
freedomRail closet components can be moved up, down, left or right.
components can be moved up and down.
Baskets and Drawers
Determine the appropriate depth to use. Placing small supplies in partitioned shallow drawers helps prevent “fishing” and disorganization. Deep drawers are meant for larger, bulkier items. Determine the appropriate type to use. Items are clearly visible when in O-Box Chrome Baskets.
Organize drawers and shelves by grouping like items (e.g. hair items, make-up, bath, first aid, cough/cold/allergy). Help manage these categories by using labels, drawer organizers, baskets or bins.
Make the closet child-friendly by storing the items children are responsible for (books, toys, music, towels, bedding, etc.) at their eye level or lower.
Certain areas of the home, especially the basement, attic and garage, can be subject to damaging heat, humidity, cold, water and insects. These conditions should dictate an item’s location, container type and storage system.
Groupings are well maintained when they are compartmentalized. Create partitioned areas within the closet design, e.g. place shelving or O-Boxes next to hanging.
Fishing for a small item in a large container of items (e.g. a small toy at the bottom of a large toy box, a particular pair of socks in a deep drawer) creates disorganization as items are scattered and dumped in the search. Shallow drawers, drawer dividers and small bins on shelves are good solutions.
If space permits, allow for some expansion of storage needs for new purchases.
Group & Categorize
Encourage clients to group like items in logical categories that work for them, e.g. by height, length, frequency of use, food category, color, style, season, etc.
Inventory Designs are typically based on an inventory of the user’s items. Once unwanted items have been purged and the remaining items have been grouped into categories, the space requirements (height, depth, width) for each category can be determined.
Locate the keepsakes in the least accessible areas of the closet (preferably in labeled plastic containers, on the lowest or highest shelves or in the corners). If space is at a premium, the best space for keepsakes may be in the basement, attic or garage. However, the temperature and humidity of these areas must be considered.
Grouping like items in drawers and containers and labeling them (use pictures for children who can’t read) makes it more likely that household members will return items to their proper places. Labels are available in freedomRail.
The following is a good guideline for the location of items on shelves within a storage area:
top shelves - large lightweight and least-used items (e.g. seasonal)
middle shelves (shoulder to waist) – most-used items
bottom shelves (below waist) – heavier, larger, less frequently-used items
shelf ends – least-used items
Positioning shelves and drawers (rather than hanging) just inside a walk-in closet’s door creates a greater sense of space inside the closet. As a general rule, position long hang garments in the corner.
Outside the Box
Closet space isn’t the only place for storage. Look for open wall space within a room to create attractive and practical storage units (e.g. corner of room, above and beside furniture, flanking a fireplace).
As a client restocks their new closet, they should eliminate items that are no longer needed (damaged, out-of-style, wrong size, etc.).
Reveal or Conceal Drawers
, Chrome Baskets with liners, and 30” O-Boxes and Go-Boxes with doors protect but conceal items. Chrome Baskets without liners and both O-Boxes and Go-Boxes without doors reveal items.
Be aware of the location of shelf corners. Household traffic patterns and heights of family members should dictate shelf placement. Allow room for fire extinguishers in areas where they are especially needed: kitchen, laundry room, garage. Do NOT block heaters, vents, electrical outlets or switches.
There’s more than one way to divide a shared closet: side-by-side in a reach-in, left and right sides of walk-in, up and down (appropriate for tall and short couple, older and younger siblings, parent and child) and by percentage of space. With the skillful location of storage components (e.g. O-Boxes between two areas of double hang), a shared storage area will appear more divided and the contents will stay more separated.
Other than tennis rackets (store these inside the home to preserve the proper tension of the strings), it’s best to store sports equipment together in one location, preferably in the garage or basement.
The goal of every good design is to maximize the vertical space in a closet or storage area. freedomRail shelves adjust up and down in 1.25” increments, significantly reducing wasted space between shelves. freedomRail allows for triple hang in a young child’s closet, a much more appropriate configuration for the lengths of a child’s clothing.
freedomRail Tiered Profile Shelf has a built-in stair step that maximizes visible shelf space and can be installed level or at an angle, depending on the customer’s needs. On Wood or Profile shelves, commercially purchased tiered organizers and single and double-decker turntables work well to bring items into view and easy reach. Using Profile or ventilated shelving for the upper shelves allows items to be easily viewed from below. Liners are available for Chrome Basket Inserts, allowing the contents of the baskets to be either concealed or visible.
How Are We Doing?